Reve D RDX Multi-select Front Knuckle (2mm offset, Base) D1-MK-B2

Reve D RDX Multi-select Front Knuckle (2mm offset, Base) D1-MK-B2

By offsetting the bearing position 2mm toward the wheel center, the rotation axis moves closer to the center of the wheel, improving rotational precision. This also reduces the load on the bearings and enhances front-end rolling performance at deep steering angles. The knuckle body features a two-piece design with an upper-mounted plate. By swapping out the plate parts (HIKARU, AKIRA, Type US), you can fine-tune your setup to suit a variety of driving conditions.

By simultaneously installing the aluminum front axle (2.0mm type) for the D1-MK-B2, you can compensate for the increased 2mm scrub radius of the knuckle and match the base offset value of the Multi-Select Front Knuckle to 4.0mm. Additionally, pairing the 2.0mm type axle with the conventional Multi-Select Knuckle allows

you to run deep-dish or high-offset wheels on the front, achieving a stylish look without compromising performance. Please note that compatible wheels are limited. Take your RDX’s front-end setup to the next level with the aluminum Multi-Select Front Knuckle (2.0mm Offset Type) and aluminum front axle (2.0mm Type)!