RPM Arrma Upper/Lower Right Front Arms Red 6S Krat/Out/Fireteam RPM81609

RPM Arrma Upper/Lower Right Front Arms Red 6S Krat/Out/Fireteam RPM81609

RPM 6S Front A-arms fit V5 / EXB editions of the ARRMA Kraton, Notorious, Talion, Fireteam & Outcast. The design modifications we incorporated accommodate changes made by ARRMA for V5 and EXB versions of these vehicles. However, they are reverse compatible for older models.

Beefier: Our A-arms are significantly beefier than our original 6S version A-arms. Lower A-arm support beams are 30% thicker while upper A-arms are more than 22% thicker. The added thickness not only improves durability and strength, it also reduces flex. Less flex equates to more predictable suspension performance and handling.

Extra Suspension Options: The lower A-arm has an added shock mount hole further outboard. This additional position provides a lower profile suspension set-up. The shocks lay down a little further, dropping the ride height for a lower center of gravity. A lower center of gravity equates to higher corner speeds.

Caster Clip Elimination: As for the upper A-arm, we eliminated the caster spacers. This gave us room to widen the arm at the inner hinge pin mount. The extra width creates more of an “A” shape, stabilizing the upper A-arm. A more stable A-arm improves steering and suspension performance while adding strength and durability.

All RPM A-arms are molded from our nearly indestructible blend of engineering grade nylons. Tough materials equate to performance you can rely on when the conditions are at their worst!

Tech Notes: RPM ARRMA Kraton, Talion, Notorious, Fireteam & Outcast A-arms are sold as one upper and one lower in each package. One left and one right package is needed for each vehicle. Our A-arms replace the upper arms from ARRMA 330655 and the lower arms from ARRMA 330656.

Version Notes:

• V5 & EXB models: Stock replacement A-arms for ARRMA 330655 and ARRMA 330656.
• V4 and earlier models: Requires 1 – ARRMA ARA713032 Shock Mount Pin & 1 – ARRMA ARA330645 End Cap. Replaces stock ARRMA AR330218 & AR330219.

Features

• Stock replacement a-arms for V5 / EXB models
• Extra shock mount hole for added suspension versatility
• Fits most 6S version models
• Sold as one upper and one lower in each package