Reve D HT Rear Lower Suspension Arm 42mm, 2.6D RD-022-26

Reve D HT Rear Lower Suspension Arm 42mm, 2.6D RD-022-26

In order to achieve the best rear traction, the Reve D development team conducted tests with various materials, shapes, and dimensions to create the HT (High Traction) rear lower arm!

The HT rear lower arm is machined from lightweight and highly rigid Duracon (POM) material, and has a high precision finish and dramatically smoother suspension movement. It comes in two lengths: 42mm and 45mm. In addition to the 0 degree caster angle for the 42mm, we also have a 2.6 degree caster angle with an inclination to the outer pin side. The 0 degree caster angle for the 42mm and 45mm has a reversible structure, and you can choose from two damper mounting heights by switching the left and right sides. The
2.6 degree caster angle for the 42mm allows you to increase traction without interfering with the suspension sinking by tilting the knuckle forward without adding a skid angle. * Long type suspension mounts (#8/#9, Type TK #8/#9) are recommended for the 42mm ! Be sure to try out the HT rear lower arm, which achieves the best traction performance!

Compatible models

Can be used on models with inner suspension pins of Φ3mm and outer suspension pins of Φ2mm, including the RDX.

HT rear lower arm accessories

1. M2 tapping screws × 4 pcs (for fixing the outer suspension pin)
   POM 6mm thick spacer × 2 pcs
   *Please use the included 6mm wide spacer etc. appropriately depending on the width of the suspension arm of the vehicle you are using.

Line-up

• RD-020-0: HT rear lower arm (42mm, caster angle 0 degrees)
• RD-020-26: HT rear lower arm (42mm, caster angle 2.6 degrees) *Ends while stocks last
• RD-021-0: HT rear lower arm (45mm, caster angle 0 degrees)
• RD-022-26: HT rear lower arm (42mm, caster angle 2.6 degrees, compatible with rear stabilizer)
• RD-009M: Maintenance set for HT rear lower arm

(Maintenance set contents: M2 tapping screws x 4, 6mm spacers x 2)