Reve D RSD Ceramic Ball Bearing 10x5x4mm (2pcs) RBB-105C

Reve D RSD Ceramic Ball Bearing 10x5x4mm (2pcs) RBB-105C

This RSD ceramic ball bearing is designed specifically for front knuckles, and is highly accurate, lightweight, and has low resistance!

The size is 10×5×4mm, which is the size commonly used in front knuckles of various companies. The internal dimensions have been thoroughly adjusted to minimize rotational resistance while driving.

The white ceramic balls are as large as possible in diameter, and are highly durable and wear-resistant. The lightweight ceramic balls reduce rolling resistance, and the grease-less design eliminates grease, minimizing rotational loss in the front axle, which is important in RWD drifting, and achieving smooth rotation of the front tire.

Please try the RSD ceramic ball bearings, which demonstrate the ultimate rotational performance!

*The product is best used without grease, but a thin layer of oil is applied to the product surface to prevent rust when sold.
We recommend removing any oil with a commercially available cleaner before use.

By removing the rubber protectors on both sides of the bearing, it is possible to achieve higher rotational efficiency.
When removing, use a needle or other pointed object to remove the bearing, being careful not to scratch the bearing itself.

Caution

If the protector is removed, sand and other debris will easily get into the bearing. To maintain performance, perform regular maintenance.
Also, when drivivng outdoors, we recommend that you keep the protector attached to prevent sand and other debris from getting inside the bearing.